How to Manage PC Cables for Better Airflow & Neat Looks?

Cable management PC is a compulsory thing for neat looks and better airflow. PC cable management gives your system a clean and tidy look and saves you from damaging the internal components from heat build-up. Now the designs of the PC cases are based on tempered glass, from which all of the inner parts are visible so, it is an important thing to keep the case clean. You can make this happen when all of the cables are well managed. 

It is easier to manage the cables than you may think and there are no drawbacks involved. Well-managed cables not only look prettier but also stop the wires from interrupting the airflow of your fans. If the fans work well, your PC remains cool and offers low temperature and a quieter-running system. It will also improve the performance of your system and provide an advantage when it comes to overclocking your CPU and GPU.

How to Manage a PC Cable? 7 Methods

There are many ways to manage the cables instead of packing everything behind the motherboard and jamming the side panel back on. Many cable management ideas are in practice for helping to contain the clutter inside the PC. If you wonder “how to cable manage a PC,” the following steps will help you manage the cables professionally.

How to Cable Manage a PC for Better Airflow and Neat Looks

1. Planning the Things

When you want to manage cables, make a plan that will help you better in the implementation. The first thing that will remain under consideration is how many cables are there to manage. It is a good decision to write down, draw out, think about the vital equipment, and note how far the cables will travel. However, sometimes you may need to look at the cable management options provided by your chassis.

You may need to start with the power cable, as all other things such as hard drive or SSD, motherboard, and graphics card are interlinked with it. Now think about the size of each cable and consider which one needs a cable tie to the case and which one needs a cable tie together.

If you want to build a new PC, it may become a long way to start with the visual ideas only, and the worst thing is to be surprised even when you are deep into routing your cables. However, it may become easy if you already have a built gaming PC. Because now your work is only to unplug everything to start fresh. It also helps in easier graphics card cable management.

You only need to grab all of the components and wing them. While on the other hand, if you want to build a new PC, you may face some problems setting up custom pc cable management. You will go through a new plan, how to route the cables in a new PC case.

You can unplug the cables your system needs while the other cables rest in the packaging if you are a modular power supply user. It is important to save these cables, as you may need them in the future for upgrading your system.

However, if you are the user of a non-modular power supply, then it is best to isolate these extra cables with a tie to remain out of the way and not disturb the rest of the components.

2. Choosing the Right Case

There are various PC cases with different cable routing features, and they are not equally built. If you are looking for a new PC case, whether an upgrade or a fresh build, you should look out for the right size PC case. The power supply, spaces to feed the cables, and cable routing bars are essential for PC case cable management.

Although the large cases are not for everyone as they need more space, while at the same time, they contain enough space to give better management for cables. There are many other features packed in larger best cable management PC case such as, there is a power supply shroud that can cover all of the extra cables and equipped a cable routing bar that can keep things orderly. Due to the large space, you can easily move around while managing the cables.

Choosing the Right Case

However, it is not difficult to find similar features in smaller good cable management PC case. If you cannot fit all compact and smaller PC case with good airflow and cable management, you may consider mini-ITX. However, they are a little trickier to handle but may become a good choice for your small setup.

Nowadays, a good cable management PC no longer costs a fortune, and there is no more reason not to manage cables properly due to budget constraints. These PC case cable management tips are especially useful for newbies who require a lot of understanding for dealing with the hardware components.

3. Getting Right Cable Ties

If you are a user of a non-modular power supply, you may deal with the clutter of cables. Cutting off these extra cables is not a good decision, as they can help you upgrade in the future. You can use cable ties to handle them, and after using you can place them carefully.

The Velcro cable ties are best in use over zip ties or other PC cable management accessories. Because they are less complex and decrease the risk of cutting into other wires, these ties are also reusable, and the other good thing about them is that they are not expensive.

You may get Attmu 100 PCS for about $10.99 to help you with cable management inside PC case.

4. Deciding the Power Supplies

If you want to ease managing the cables, you need to have a modular power supply. It will help you to reduce these unwanted wires by making them detachable. It is better to have it instead of never arranging all of your cases and splashing behind your motherboard.

Choosing the best equipment to build up a gaming PC is important, as this will smooth your way in this process. It will also make things tidy, and you may get rid of the problems that will come with the piles of cables.

Deciding the Power Supplies

If these modular power supplies are not in your budget, you may consider the semi-modular power supplies. As the name shows that there are some of the cables are detachable with these models. However, the permanently installed cables are those that you may need to use in any way. If you want to manage with a mini-ITX, you also have to opt for a small form factor PSU to get enough room to work.

If you are stuck with a non-modular power supply, then there are enough ways to handle it in a better way for proper cable management. But it may need more effort to handle them. You can spend a few bucks and don’t have to worry about it, as you can get EVGA SuperNOVA 650 power supply at an affordable price of $90.

5. Routing the Cables the Right Way

The cables on the CPU, your fans, cooler, and front panel remains connected to your plaited power supply, and they are not stretching too far. But it is vital to connect them with your motherboard before starting your big project. It may become disappointing to know that the one cable will not reach its place because the other one is in its way.

When you plug in the SATA cables you need and feed them to the back of the cage; then you can turn your attention to the big box at the bottom. It is better that you should tackle the long wire first, such as the 24 pin motherboard power connecter, because they may cause a problem when you place the other cables. 

Almost all of the cables are routed along the sides of the case or backside using the cutouts. There is no need to obstruct the heatsinks, fans, cooler, improving the airflow, and even the longevity of your gaming PC. It is safe among the pc case cable management options.

When you connect all of the cables at their place, then have a look at all of your connections and make sure everything is in order so that you can avoid any problem while pressing a button. First of all, make sure that you switch on the power supply at the rear because you may not see most of the cables from the front, instead of the necessary ones. The place behind the motherboard should be neat if you use most of the length of the cables.

When you successfully boot your PC and all of the components work without any issues, you can tie all of the cables, pop the side panels back, and finish your work with great feeling. 

6. Touching Everything to Perfection

The management of cables may vary from one build to the other. But you will pay all of your attention to every single cable and make it possible to rout them as clean as you can. You need to consider many things to help cable management inside your PC case.

It is a good decision to hide the cables at the motherboard’s backside until all of the cables are not at their place. In my recommendation, you will connect all of the front-panel and case-related cables first. Then connect the other drive cables and attach them to the power supply. While on the other hand, if you want to handle all of the things at once and through everything into the system, you may face problems understanding which one is the right connection.

Make sure that while adjusting the cables, the fans or coolers are not covered with the cables. It may affect the cooling system and also fails to lower the temperature. In most cases, the cables remain winded up behind the motherboard tray. But if your case doesn’t follow this, you will need to try running all of the cables along the edges. It may help to get a clean and tidy look.

When you place all of the cables, then start to secure them in bundles. The long cables with excess connections, try to consider them together so that they will not come in the way of other components. Most of the cases offer you large space at the bottom of the chassis, where you can place these bundles of cables and hide them behind the motherboard tray.

7. Managing the Outside Cable Clutter

It is also an important thing to give a neat look at the back of your gaming PC as well. There are some ways to hide these cables such as, you can hide them behind the stand of your gaming monitor, and you can also invest in an under desk cable management system to keep all of the cables off the floor.

However, if you are tired of these cables, you can pick up a wiles gaming mouse and a wireless gaming keyboard. These wireless gaming gadgets are away from cable headaches and give you the advantage of bringing them anywhere.

Managing the Outside Cable Clutter

You may not enjoy the best gaming wireless microphones unless you opt for a wireless gaming microphone. There is another option to drill the holes in your deck to attach the cables so that they can disappear beneath the tabletop. But before doing this, make sure that all of your gadgets are at their place. 

We will recommend using velcro or ties instead of zip ties for tying up your excess cables. Because it is easy to swap, and you can easily detach any of your peripherals. You can use a PC cable management kit for easier and more organized cable management.

Benefits of Cable Management

Airflow to Keep Cool:

Good cable management not only gives your PC a clean and tidy look but also helps to improve the airflow. When the cables are at their place, the fans will catch cool air from the environment without hindrance.

If the cables get tangled from one corner to the other corner of the case, it will restrict airflow. It may bring a high temperature, and the components will exhaust instantly. Everyone knows very well; heat is the enemy of good performance.

When you manage the cables well, you will offer the best airflow among the components, and the fans do their work to control temperature and keep hardware cool from inside.

Easy Upgrading and Maintenance:

While upgrading the system, this jungle of wires may create a problem for you. But if these wires are well managed, you can easily reach the PCI-E port and install a glistening new SSD.

Carefully organized cables provide a clear path for ports and bays, enabling upgrades and repairs with greater clarity and efficiency.

Cable Management: An Art to Perfection

There is no basic secret behind cable management. Those who struggle to manage cables should follow these instructions, as there is no rocket science to understand them.

It is an art where you will face some trials and errors, but you will get excellent results in the end. It is just like a painter’s work, as the painter toils away draft after draft of his project and finds a good result. Just as cable management follows the simple formula, the better the outcome, the more time you put into it. It is only the work of patience.

You may remove and replace the hardware and also use ESD tape. You can use a cable tie to keep the cables in place inside the case. Mostly you may feel like you are taking two-step backward to move one step forward. But after all of this struggle and experiments, you will get a perfect result, and the rewards far outweigh a couple of hours of frustration.


Hi, I am Robert. I made myself expert in all PC components. I tested and taken reviews from users, specially Gamers to make a reliable buying guide and best product descriptions. It will help to find compatible parts and save your money on PC custom build.

We will be happy to hear your thoughts

Leave a reply

PC Custom Builder